DE.NA 13g Copper Refrigeration Filter Driers – Pack of 10

Product Overview

Original DE.NA copper filter drier for professional refrigeration service and sealed-system repair. Designed to help remove moisture and fine contamination from the refrigerant circuit.

Key Specifications

• Brand: DE.NA
• Type: Copper spun refrigeration filter drier
• Drier charge: approx. 13g
• Connection sizes: approx. Ø5.2 mm × Ø2.5 mm
• Supply: New component with protective end caps

Dimensions / Measurements

The verified connection diameters are approximately 5.2 mm and 2.5 mm. Check the original body length and available installation space before ordering if clearance is critical.

Compatibility

Confirm drier capacity, connection sizes, refrigerant/oil suitability and system duty against the original installation. Refrigerant compatibility must be confirmed for the actual sealed system rather than assumed from appearance alone.

Installation

Keep the drier sealed until fitting. Protect the body from excessive brazing heat and use dry nitrogen purge where appropriate. After work, pressure-test, evacuate and charge the circuit correctly.

Hydrocarbon Safety

R600a and R290 are highly flammable. Work on hydrocarbon systems must be carried out by a competent refrigeration engineer using suitable tools, ventilation and ignition-control procedures.

Need Help?

Send Brave Coolers a photo of the existing drier, pipe sizes and equipment model if you need help checking suitability.