£398.29 ex VAT
£639.96 ex VAT
KD TSE015M1 Low Profile Evaporator — 1.91kW Reference Duty
£723.95 inc VAT
£603.29 ex VAT
Low profile blow-through with EC fans evaporator, 6mm fin spacing and electric defrost. 1907W reference cooling duty at 0°C room / DT1 8K / R449A. Externally equalised TXV required separately.
Delivery options and applicable charges are shown at checkout. For urgent spare parts orders, contact us before 2:00 PM (Mon–Fri) to confirm stock and dispatch. Large equipment, cold rooms and special courier items have separate delivery arrangements.
The equipment price excludes delivery. Need delivery? Arrange delivery and request a quotation before payment. Confirm your collection date and location before travelling.
KD TSE015M1 evaporator
Low profile blow-through cooler with EC fans for an engineer-selected cold room system. Range image is representative.
Cooling performance and rating conditions
Published R449A reference duty: 1907 W at 0°C room temperature and DT1 = 8K. DT1 is the air-on to refrigerant evaporating temperature difference. These figures are cooling duties, not electrical consumption. Re-select for the actual refrigerant, room load and operating conditions.
Technical specification
- Fin spacing: 6mm
- Fans: 2 × 250mm
- Total fan electrical input: 48 W
- Defrost heater electrical power: 1560 W
- Fan supply: 230V / 1 phase / 50Hz; verify heater wiring and protection against the supplied wiring diagram
- Dimensions L × D × H: 945 × 453 × 301 mm
- Weight: 18 kg
- Inlet / outlet: 1/2″ inch / 5/8″ inch
- Reference air throw: 6m at 0.25m/s terminal velocity
- IP66 terminal box; this does not assign IP66 to the complete cooler
Included
Evaporator assembly, fan motors, factory electric defrost heaters and terminal box.
Separately required / select for the installation
Externally equalised thermostatic expansion valve, suitable refrigerant and orifice selection, and the required distributor connection. Also select condensing unit, controller and probes, liquid solenoid/coil where required, insulated pipework, mounting supports and drain connection. Drain heater and insulation requirements depend on room temperature and installation; confirm provision before ordering.
Engineer setup checklist
Allow service and airflow clearances, support the full operating load and provide a correctly trapped and sloped drain as specified by the manufacturer. Check TXV bulb/equaliser positioning, fan rotation, electrical protection and defrost circuit wiring. Set defrost timing, termination, drip time, fan delay and superheat for the actual application using the supplied equipment instructions; verify drainage and temperature recovery during commissioning.
Delivery
Estimated delivery: 2 working days, subject to stock, postcode and equipment transport confirmation. Commercial equipment delivery charges and access requirements apply.
| Weight | 18 kg |
|---|---|
| Brand | KD |
| Model | TSE015M1 |
| Fin spacing | 6mm |
| Reference cooling duty | 1907 W — R449A, room 0°C, DT1 8K |
| Fan electrical input | 48 W |
| Defrost heater power | 1560 W |
| Dimensions L × D × H | 945 × 453 × 301 mm |
| Expansion valve | Externally equalised TXV required separately |
Model compatibility and reference numbers
| OEM / part reference | Not specified — please confirm before ordering. |
|---|---|
| Listed brands | Not specified — please confirm before ordering. |
| Listed models | Not specified — please confirm before ordering. |
Reference numbers and brand names assist identification; they do not by themselves confirm fit or genuine OEM manufacture. Check the full model and part number, dimensions and electrical specifications. If unsure, send us a photograph of the rating plate and original part before ordering.
Related products
KD TSE040M1 Low Profile Evaporator — 3.69kW Reference Duty
In stock
£884.13 ex VAT
KD TD050M-ED Cubic Evaporator — 4.59kW Reference Duty
In stock
£899.13 ex VAT
KD TD045M-ED Cubic Evaporator — 4.05kW Reference Duty
In stock
£844.96 ex VAT
KD TD040M-ED Cubic Evaporator — 3.39kW Reference Duty
In stock
£765.79 ex VAT
Reviews
There are no reviews yet.